Ordering no:
Female panel mount connector IP 67, shielded
Female panel mount connector IP 67, shielded, Series 440
Available numbers of contacts
Variants for number of contacts 3
Variants for number of contacts 4
Variants for number of contacts 5
Variants for number of contacts 6
Variants for number of contacts 7
Variants for number of contacts 8
Variants for number of contacts 12
Variants for number of contacts 14
Variants for number of contacts 19
09 4808 00 03
Push-Pull female panel mount connector, Contacts: 3, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4808 00 03
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 20.557 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 4812 00 04
Push-Pull female panel mount connector, Contacts: 4, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4812 00 04
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 20.74 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 4816 00 05
Push-Pull female panel mount connector, Contacts: 5, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4816 00 05
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 20.834 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 4820 00 06
Push-Pull female panel mount connector, Contacts: 6, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4820 00 06
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 21.04 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 4828 00 07
Push-Pull female panel mount connector, Contacts: 7, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4828 00 07
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 21.144 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 4832 00 08
Push-Pull female panel mount connector, Contacts: 8, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4832 00 08
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 21.996 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 4836 00 12
Push-Pull female panel mount connector, Contacts: 12, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4836 00 12
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 20.626 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
09 4840 00 14
Push-Pull female panel mount connector, Contacts: 14, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4840 00 14
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 20.744 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
09 4844 00 19
Push-Pull female panel mount connector, Contacts: 19, shieldable, solder, IP67
Push Pull, series 440, Miniature connectors
| Artikelnummer |
09 4844 00 19
|
| Connector locking system | Push-Pull |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 1000 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuSn (bronze) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 21.025 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?