Ordering no:
Cable plug connector, cable outlet 6-8 mm
Cable plug connector, cable outlet 6-8 mm, Series 678
Available numbers of contacts
Variants for number of contacts 2
Variants for number of contacts 3
Variants for number of contacts 4
Variants for number of contacts 5
Variants for number of contacts 6
Variants for number of contacts 7
Variants for number of contacts 8
Variants for number of contacts 12
Variants for number of contacts 14
Variants for number of contacts 16
Variants for number of contacts 19
Variants for number of contacts 24
99 0601 02 02
Bayonet cable connector, Contacts: 2, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0601 02 02
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 7.826 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 0605 02 03
Bayonet cable connector, Contacts: 3, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0605 02 03
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 8.086 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 0609 02 04
Bayonet cable connector, Contacts: 4, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0609 02 04
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 8.09 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 0613 02 05
Bayonet cable connector, Contacts: 5, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0613 02 05
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 8.535 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 0617 02 06
Bayonet cable connector, Contacts: 6, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0617 02 06
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 6 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 8.763 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Gegevensblad
CAD files
99 0621 02 07
Bayonet cable connector, Contacts: 7, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0621 02 07
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 8.987 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
Downloads
Gegevensblad
CAD files
99 0645 02 08
Bayonet cable connector, Contacts: 8, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0645 02 08
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Ag (silver) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 9.208 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
Downloads
Gegevensblad
CAD files
99 0649 02 12
Bayonet cable connector, Contacts: 12, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0649 02 12
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 9.167 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
99 0653 02 14
Bayonet cable connector, Contacts: 14, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0653 02 14
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 9.461 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
99 0657 02 16
Bayonet cable connector, Contacts: 16, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0657 02 16
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 9.713 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
99 0665 02 19
Bayonet cable connector, Contacts: 19, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0665 02 19
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 9.7 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
99 0669 02 24
Bayonet cable connector, Contacts: 24, 6,0 - 8,0 mm, Shielding is not possible, solder, IP40
Bajonett, series 678, Miniature connectors
| Artikelnummer |
99 0669 02 24
|
| Connector locking system | Bayonet |
| Termination | solder |
| Wire gauge (mm) | 0,14 mm² |
| Wire gauge (AWG) | 26 |
| Cable outlet | 6,0 - 8,0 mm |
| Degree of protection | IP40 |
| Mechanical operation | > 500 Mating cycles |
| Upper temperature | 85 °C |
| Lower temperature | -40 °C |
| Rated current (40°C) | 1 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 500 V |
| Pollution degree | 1 |
| Overvoltage category | I |
| Material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Material of contact | CuZn (brass) |
| Contact plating | Au (gold) |
| Material of contact body | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 8.78 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
Downloads
Gegevensblad
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?